GigaCore 16Xt

The GigaCore 16Xt is a Gigabit Ethernet switch designed to cope with the most demanding lighting and AV installations. Managed through an intuitive web interface, the unit can also be configured from the front end display*, making this switch an hassle-free solution for every day job. Four SFP cages also offer users to create complex network topologies over fiber link, such as mesh or ring. Additional available options makes the GigaCore 16Xt one of the most secured system of the industry.

Key Features

  • Wire-speed Layer 2 Switching
  • Sound protocol compliant: Low jitter
  • Industry specific web interface
  • Front end display for basic configuration*
  • RLinkX: Activate redundancy on ports to create secured links
  • Group: Create group within your network for a better network isolation*
  • MultiLinkX: Group ports together to increase the available bandwidth between two GigaCore switches*
  • Port status
  • 3 LEDs per port: PoE, RLinkX*, Link/Speed
  • 4 status LEDs for the device: OK, PoE, RLinkX*, Power
  • Redundant fans
  • Universal power supply: 100-240VAC

Options

  • PoE supply unit: Deliver up to 100W through the 10 front Ethercon connectors
  • Backup PSU
  • Backup PoE supply unit

Connectivity

  • 12 x 10/100/1000Mbps Ethernet connections on Neutrik Ethercon connector
  • (10 on the front , 2 at the rear)
  • 4 x SFP cages (Accept 100/1000Mbps compliant mini GBIC transceiver)
  • 1 x IEC power inlet
  • 1 x Molex Micro-Fit 6 pin connector for redundant PSU
  • 1 x Molex Micro-Fit 6 pin connector for redundant PoE supply
  • 1 x RJ45 for serial console port
  • 1 x RJ45 for expansion port
Network
  • 12 x 10/100/1000Mbps shielded
  • Neutrik Ethercon connectors
  • 10 on the front, 2 at the rear
  • 4 x SFP cages, compliant
    with 10/100/1000Mbps Mini GBIC transceiver
  • 1 x serial RJ45 console port
  • 1 x RJ45 expansion port
Power
  • 1 x IEC inlet with fuse holder
  • 1 x redundant power input on
  • Molex Micro-Fit 6 pins connector
  • 1 x redundant PoE input on
  • Molex Micro-Fit 6 pins connector
Switch Features
  • Ethernet Compliance: IEEE 802.3, IEEE 802.3u, IEEE 802.3x Flow Control, IEEE 802.3ab Gigabit Ethernet
  • Supported Protocols: IEEE 802.1p CoS (Class of Service), PoE (802.3af) through optional module
  • Ethernet Switch Type: Full non blocking wire-speed switching performance
  • Memory: 4Mb
  • MAC Address Table: 8192 Entries
  • Address Learning / Aging: Self learning, Auto aging
  • SwitchingThroughput: 28Gbps
  • IGMP support: Yes (V1/V2)
  • IGMP Snooping: Available in a future firmware update
Status Report
  • Ethernet Port Connection: PoE (optional), RlinkX (Optional Redundancy)
  • Link / Speed
  • Ethernet Port Speed: 100/1000Mbps LED
  • Device: Status LED
  • Power: Status LED
  • PoE: Status LED
  • RLinkX (Optional Redundancy): Status LED
Port Features
  • Port Speed: Copper: 10/100/1000T
  • Fiber: 100/1000BaseX
  • Port Sensing: Auto negotiation
  • Auto Crossover: MDI / MDIX (allow to use straight or cross wired cable)
  • Auto Sensing: Full or Half Duplex (Gigabit is Full Duplex)
Status Report
  • Ethernet Port Connection: PoE (optional), RlinkX (Redundancy), Link / Speed
  • Ethernet Port Speed: 100/1000Mbps LED
  • Device: Status LED
  • Power: Status LED
  • PoE: Status LED
  • RLinkX (Redundancy): Status LED
Management
  • Through the built-in web server or with the front end display menu
Power Input
  • Power Input: 90-260VA, 47-63Hz
  • Backup Power Input: 15VDC / 2A on Molex Micro-Fit 6 pin connector
  • Backup PoE Input: 48VDC / 2.1A on Molex Micro-Fit 6 pin connector
  • Power Consumption: Maximum 30W
  • Maximum 130W with PoE Supply Unit
  • Fuse: 3.15A 250V Slow Blow
  • Power over Ethernet (PoE) support: Optional PoE Supply Unit
Environmental
  • Operating Temperature: 0 to +60 °C
  • Storage Temperature: -10 to +70 °C
  • Humidity (non condensing): 5 to 95 % RH
Physical
  • Enclosure: Metal housing
  • Dimensions (W x D x H): 482 x 204,3 x 44 mm, 19″ x 8.04″ x 1.73″
  • Packaging: 520 x 235 x 50 mm
Additional Information
  • Approvals: CE, EN 55103-1, EN 55103-2, EN 60950-1, RoHS Compliance, EN 60825-1 Safety of laser Products-Part 1
    EN 60825-2 Safety of laser products-Part 2
  • Order Reference: GigaCore 16Xt: LU01 00048, GigaCore 16Xt with PoE output: LU01 00048-POE
  • Note: Luminex LCE operates a policy of continuous development. Luminex LCE reserves the right to make changes and improvements to any of the products described in this document above without prior notice. Specifications are subject to change without notice.