GigaCore 12

The GigaCore 12 is a managed Gigabit Ethernet switch designed to cope with the most demanding lighting and AV installations, but in a truly user friendly way.
The unit offers 12 Gigabit ports on shielded Neutrik Ethercon ports, making the product a hard environment friendly device. All configurations are done through the industry oriented web interface.

Key Features

  • Wire-speed Layer 2 Switching
  • Sound protocol compliant: Low jitter
  • Industry specific web interface
  • RLinkX: Activate redundancy on ports to create secured links
  • Group: Create group within your network for a better network isolation
  • MultiLinkX: Group ports together to increase the available bandwidth between two GigaCore switches
  • Port status
  • 3 LEDs per port: PoE, RLinkX*, Link/Speed
  • 4 status LEDs for the device: OK, PoE, RLinkX*, Power
  • 1 x fan
  • Universal power supply: 100-240VAC

Connections

  • 12 x 10/100/1000Mbps Ethernet connections on Neutrik Ethercon connector
  • (10 on the front , 2 at the rear)
  • 1 x IEC power inlet
Connectivity
  • Network: 12 x 10/100/1000Mbps shielded
  • Neutrik Ethercon connectors
  • 10 on the front, 2 at the rear
  • Power: 1 x IEC inlet with fuse holder
Switch Features
  • Ethernet Compliance: IEEE 802.3, IEEE 802.3u, IEEE 802.3x Flow Control, IEEE 802.3ab Gigabit Ethernet
  • Supported Protocols: IEEE 802.1p CoS (Class of Service)
  • PoE (802.3af) through optional module
  • Ethernet Switch Type: Full non blocking wire-speed switching performance
  • Memory: 4Mb
  • MAC Address Table: 8192 Entries
  • Address Learning / Aging: Self learning, Auto aging
  • SwitchingThroughput: 24Gbps
  • IGMP support: Yes (V1/V2)
  • IGMP Snooping: N/A
Port Features
  • Port Speed: Copper: 10/100/1000T
  • Fiber: 100/1000BaseX
  • Port Sensing: Auto negotiation
  • Auto Crossover: MDI / MDIX (allow to use straight or cross wired cable)
  • Auto Sensing: Full or Half Duplex (Gigabit is Full Duplex)
Status Report
  • Ethernet Port Connection: PoE (optional), RlinkX (Optional Redundancy)
  • Link / Speed
  • Ethernet Port Speed: 100/1000Mbps LED
  • Device: Status LED
  • Power: Status LED
  • PoE: Status LED
  • RLinkX (Optional Redundancy): Status LED
Management
  • Configuration: Information and status through the built-in web server
Power Input
  • Power Input: 90-260VA
  • 47-63Hz
  • Power Consumption: Maximum 30W
  • Maximum 130W with PoE Supply Unit
  • Fuse: 3.15A 250V Slow Blow
  • Power over Ethernet (PoE) support: Optional PoE Supply Unit
Environmental
  • Operating Temperature: 0 to +60 °C
  • Storage Temperature: -10 to +70 °C
  • Humidity (non condensing): 5 to 95 % RH
Physical
  • Enclosure: Metal housing
  • Dimensions (W x D x H): 482 x 204,3 x 44 mm
  • 19″ x 8.04″ x 1.73″
  • Packaging: 520 x 235 x 50 mm
Additional information
  • Approvals: CE, EN 55103-1, EN 55103-2, EN 60950-1, RoHS Compliance
  • Order Reference: GigaCore 12: LU01 00036
    GigaCore 12 with PoE output: LU01 00036-POE
  • Note: Luminex LCE operates a policy of continuous development.
    Luminex LCE reserves the right to make changes and improvements to any of the products described in this document above without prior notice. Specifications are subject to change without notice