Ethernet-DMX8 MKII

This product has been discontinued. Replaced by LumiNode 12.

The Ethernet-DMX8 MkII is an Ethernet node that serves 8 DMX512 outlets, compatible with the Artnet protocol. All outlets are conform to DMX512-A and can be used as input or output. The two Ethernet links on the front and at the rear are 10/100BaseTX connections on Neutrik RJ45 Ethercon connectors. All configuration can be done over Ethernet through a build in Web site, by using the jog on the front end, or through LumiNet Monitor V.2 software. This all comes in a 19″ 1 unit high metal housing that can be rack mounted.

Key Features

  • DMX routing, universe setting
  • Input and output enable / disable
  • DMX input / output frame rate setting
  • IP settings
  • Unit ID and labeling
  • Ethernet activity indication on front panel
  • Up to 40 programmable profiles and routings
  • Up to 10 predefined profiles (ethernet, splitters, mergers)
  • Multi language Web interface and help file


  • 2 x 10/100BaseTX Ethernet connections on shielded Neutrik RJ45 Ethercon connectors
  • 8 x DMX512-A in/outputs on shielded and isolated 5 pin female XLR, with termination (DMX512-A)


  • Ethernet <-> DMX (ArtNet)
  • DMX Merger
  • DMX Backup
  • DMX splitter / booster
  • DMX trigger. Remote selection of the merging policy through DMX
  • Built-in DMX softpatch
  • Wysiwyg enabled. DMX inputs can be visualised in Wysiwyg
  • DMX snapshot. Capture 3 lighting states (fixed values) per outlet
  • Modification of captured values from the Web interface
  • Auto-load capture on boot-up (ideal for expo)
Input 1 x Neutrik RJ45 Ethercon connector(front)
1 x Neutrik RJ45 Ethercon connector (rear)
Outlets 8 x shielded Neutrik 5 pin XLR (female)
RJ45/EtherCon Ports: 10/100 BaseTX
RJ45/EtherCon (10 or 100Mbps): auto-negotiation
DMX Port Direction: input/output (configurable)
DMX Port Refresh: 10-40 fps
DMX Port Termination/Biasing: Yes
Port isolation: Optic isolation per port
Galvanic isolation per two ports
DMX Protocol: DMX512 (1990), DMX512-A
Break 92-352 µs, default 176 (configurable)
Mark After Break (MAB) 12-88 µs (configurable)
Status Report Ethernet Ports Connection: link and activity
Power: LED Indicator
Additional Features Monitoring Software: LumiNet monitor V.2 at no cost
Wysiwyg Enabled: yes (visualize inputs)
Environmental Power Input: 90-260 VAC
47-63 Hz
Power Consumption: Maximum 20 W
Operating Temperature: 0 to +60 °C
Storage Temperature: -10 to +70 °C
Size: 482 x 153,5 x44 mm