Chroma-Q Studio Force D 12 Phosphor

Extreme Output Daylight White Phosphor LED Fixture

The new Chroma-Q® Studio Force D Phosphor™ is a 5,600K CCT, daylight white fixture which utilises innovative LED technologies found in the Studio Force™ range to provide an equivalent soft edge output to a fluorescent fixture – up to 8,210 lumens – developed specifically for use in TV, film and broadcast studio environments. Other features include an extremely smooth uniform wash, extra soft beam, theatrical grade dimming, laboratory calibration to match Black Body Locus. Designed for practicality, the unit is equipped with a manual control mode, color touch screen interface, fanless, studio & full modes for maximum control of the units and a range of optional accessories.

Key Features

  • 5,600K CCT daylight white
  • Extreme output – up to 8,210 lumens
  • Extra soft beam – very wide output
  • Extremely smooth, uniform wash
  • Theatrical grade dimming
  • Ideal for film and studio applications
  • Factory calibrated to match Black Body Locus
  • 335mm / 13.2″ length ideal for floor, wall or truss mounting
  • Camera friendly
  • PowerCon input and output for easy daisy chaining of fixtures
  • Broad range of accessories available, including barn door and spigot adaptor
  • Fanless, studio & full control modes
  • Intuitive color touch screen interface
  • Flat end plates for seamless wall-washing
  • Built-in power supply
  • Hidden quick release fixings
  • Rugged extruded aluminium body

More information on the Studio Force D 12 Phosphor.

Full list of trademarks and disclaimers.

Product Code CHSFDP12
Dimensions 335mm x 190mm x 218mm / 13.2″x 7.5″ x 8.6″
Weight 4kgs / 9lbs
Shipping Dimensions 432mm x 343mm x 279mm / 17″ x 13.5″ x 11″
Shipping Weight 6kgs / 13lbs
Power Supply Built-in
Power Input Rating 100-240V AC, 50-60 Hz, 160VA
Power Factor 0.998
Power Consumption 150W
Typical Power & Current Measurements done with all LEDs at maximum intensity. Measurements made at nominal voltage. Allow for a deviation of +/- 10%.
Power Connector In/Out PowerCon
Data Connectors In/Out XLR 5-pin
Control Protocol ANSI E1.11 USITT DMX 512-A
Cooling System Forced – 1 fan
Operating Temperature 0°C to 40°C
Construction Anodised aluminium extrusion
Color Black
Built-In Hardware Quick release lever for tilt adjustment
IP Rating IP20
Approvals CISPR 22/EN55022 & CISPR 24/EN55024, ICES-
003 & FCC Part 15 Subpart B, CSA C22. No.166-
M1983:R2008 UL 1573:2010; UL 8750:2009
LED Engines 2
LEDs Per Engine 24 Blue LEDs
Total LEDs 48
Control Modes 1 channel Level,
1 channel Look Sel,
Look Store
Dimming Curve Theatrical
Variable Effects Engine N/A
Effects Parameters N/A
Hot Lumen Output Up to 8,210
Optics Remote phosphor panel
Beam Angle Softlight
Beam Distribution Symmetrical direct illumination
CCT 5600K (+/- 200K)
Color Gamut Performance enhanced
CRI Up to 71
Lamp Life L70 at 50,000 hours
  • CHCFZH12: Zip Hood For 12
  • CHCFSA12: Spigot Adaptor For Force 12
  • CHCFECL12: Egg Crate Louver For Force 12
  • CHCFTH12: Top Hat For Force 12
  • CHCFHTH12: Half Top Hat For Force 12
  • CHCFBD12: Barn Door For Force 12
  • CHCFDBX: Diffuser Box For Force 12
  • CHCFLBA12: Lightbank Adaptor (Speedring) For Force 12
  • CHCFLB12: Lightbank For Force 12
  • CHCFLBK-K: Lightbank Kit+ For Force 12 (consists of Lightbank Adaptor (Speedring) & Lightbank