The Wincher is a four-stage telescopic hoist completely made of aluminium and weighing about half as much as the previous iron models.

The lifting system consists of a polyester belt winch which ensures smooth fluent movement. Each of the three upper stages runs on self-lubrificating polyzene guides and is pulled by a three-cable unit. The base feet may be adjusted independently and extensively for easy positioning even on sloping and irregular surfaces.

An accessory for fixing trusses with 200 to 300mm sides is available with code number C4485. A support for trusses with 200 to 400mm sides is also available.

Unitower is designed with QX30S and QD30SA truss.

The sleeve block will take square truss of 29cm or 40cm or trianagular truss of 29cm sides. In order to connect 40cm triangular a substitute central support plate is needed.

Every face has a series of holes for attachment of special steel spigots to allow a variety of diverse trusses to be incorporated.

The sleeve block allows for the securing of either manual or electric hoists.

The legs can be completely detached, leaving the vertical truss without any protruding parts.

Varitower 2 can take a 29 or 40cm vertical truss, with the best performance seen from the QX40S twist-resistant truss.

The system is furnished with telescopic stabilizers, multistandard sleeve block with 16 gliding wheels in high density rubber, and the top designed for chain feed. The complete system, except the central truss, is composed of assembled parts, without any weldings.

Varitower 2 uses only manual or electric chain hoist systems and for either system a corresponding support is available.

The base is made entirely of aluminium, and has telescopic legs with adjustable feet. Each leg can be moved horizontally in two directions for precise positioning. Once assembly is completed the legs may be removed entirely from the base.

The MT40 base can be used with all twist resistant trusses. The towers are designed for use with chain hoists with a lifting capacity of up to 2000kg. The components are made entirely of aluminium and can be used with various types of truss. The supporting legs are mounted on the central base.

There is a compact version for use indoors where the ground space occupied cannot exceed the truss dimensions.

The MT52 base can be used with the twist resistant QL52A and QL40A trusses.

The four foot bars are telescopic, positionable, individually adjustable and extractable.

A compact base version is also available.

The MT76 base can be used with the twist resistant QL76A truss.

The four foot bars are telescopic, positionable, individually adjustable and extractable.

MT76 is particularly suited for use with Libera 105.

Support tower for audio systems consisting of a QD30SA structure, suitable for lifting loads of up to 600kg to a height of 9.5 metres.

To lift the loads, anchoring is provided for an electric chain hoist. Alternatively they may be lifted manually by adding a cable winch device.

Vertical audio system support tower.

It consists of QL52A structures and is suitable for lifting loads of up to 2500kg to a height of 13m.

The electric chain hoist is fitted directly to the top truss structure.

A lifting system is available for raising the tower.