Libera 52 System
Libera 52 is based on FL52 flat section trusses, made entirely of aluminium.
Its use concept is similar to Libera 76, but it has a different connection system. A central star module is used for interconnection.
The star module cuts down assembly times and has a central hole for inserting other components. It is therefore even easier to fit a roof covering, or add a ceiling anchoring system, or even hang components on the lower plane.

FL52
Flat section high load aluminium truss with 520mm long sides.
Characteristics of the materials
Lengthways tube Extruded tube Ø 50 × 4mm EN AW 6082 T6
Diagonal tube Extruded tube Ø 30 × 3mm EN AW 6082 T6
Ends Aluminium fork connector EN AW 6082 T6
Connection Kits
KHLP Steel pin

Plate (mm)

Picture Code Description
Weight
FL52086V 860mm long flat truss
5.6kg
FL52137V 1370mm long flat truss
7.9kg
FL52186V 1860mm long flat truss
9.9kg

Picture Code Description
Weight
FL52033R 330mm long flat truss
12.2kg
FL52035R 350mm long flat truss
18.8kg

Picture Code Description
Weight
FL52CS04 Four way fork connection
3.1kg
Also available in two and three way versions

Alusfera
Utilising the three standard Libera truss sizes, along with a selection of special new pieces it is possible to create this semi-spherical structure.
The height and length of the front opening are dependant on the type of Libera truss modules used.
With Libera 52 the maximum front opening is 16m, with Libera 76 it is 20m and with Libera 105 you can have a front opening of 24m and a centre height of 12m.