Libera 105 System
FL105 truss has a section of 1050mm; the upper main tubes have a diameter of 60mm and are 5mm thick.
Aluminium fork-ends allow connection with a 4-way 'star' module.
FL105 grants the wide variety of different arrangements already tested with Libera 52 and Libera 76, hugely increasing the loading capacity.
Set-ups for truss, grid and roofing system can be easily managed coupling the FL105 and the modular 'star' connector.

FL105
Flat section high load aluminium truss with 1050mm long sides.
Characteristics of the materials
Lengthways tube A Extruded tube Ø 60 × 5mm EN AW 6082 T6
Lengthways tube B Extruded tube Ø 50 × 5mm EN AW 6082 T6
Diagonal tube Extruded tube Ø 50 × 4mm EN AW 6082 T6
Ends Aluminium fork connector EN AW 6082 T6
Connection Kits
KHLP Steel pin

Plate (mm)

Alusfera
Utilising the three standard Libera truss sizes, along with a selection of special new pieces it is possible to create this semi-spherical structure.
The height and length of the front opening are dependant on the type of Libera truss modules used.
With Libera 52 the maximum front opening is 16m, with Libera 76 it is 20m and with Libera 105 you can have a front opening of 24m and a centre height of 12m.