| Products: Effects: Diversitronics |
 |
||
 |
||
| Notes: | |
 |
Hyperflash is a model feature allowing continuous and full flash power for short bursts. Hyperflashes are extremely bright, ultra-high intensity, exaggerated pulses of pure white light. In addition to complete normal control operation of rate and intensity, Hyperflashes also employ simple combinations of rate and intensity inputs to trigger pre-programmed macro responses based on continuous illumination rates. In other words, hyperflashes flash so fast that the human eye perceives them as being continuous. The macros include, short blast, crossfade, fade out, lightning and continuous. Changes between response modes can be made swiftly by simply changing rate settings from your controller. Extended continuous illumination occurs as long as the signal remains present. Use of lightning mode produces startling pre-programmed lightning simulations. Of course, any number of fixtures may be used in any response mode to create your own programmed effects. Any fixtures throughout this page that are equipped with Hyperflash carry the Hyperflash symbol alongside. |
|
|
 |
This symbol denotes that the unit is weather resistant to some degree. Look on the feature list of each fixture to see its IP rating. Across the range, features include watertight connectors, sealed seams, gaskets and conformal coated electronics. Some have drain openings. None of the units, however, are submersible. |
| DMX Strobes |
 |
DMX Strobe Cannon |  |
Dome Cannon Strobe |
| DMX Strobe Cannon |
|
DMX Strobe Cannon modules are high performance, direct DMX-512 control, professional xenon strobe lights. They are high intensity and designed for professional use to fit most par cans. They concentrate explosions of light into designed areas of illumination. | ||
 |
DMX control - up to 256 strobes with individual rate and intensity | ||
|
High output power 30 Joules/flash, 600,000 candela | ||
|
Operates from standard 120V 50/60Hz line voltage, specify -240 if 240V 50/60Hz is required | ||
|
Analog inputs/outputs (including stand alone) | ||
|
Microprocessor DMX-512 control of individual rates and intensities | ||
|
Digital channel assignment selector | ||
|
Daisy-chain analog control compatible | ||
|
Auto recognition of control scheme | ||
|
High speed flash rates to 15 fps | ||
|
Self-resetting safety thermal switch (55°C) | ||
|
Not phase sensitive | ||
|
Can be used with Diversitronics RC-A and Strobe Runner controllers | ||
|
30 degree beam angle produces a spot of 6' in diameter at a throw of 12' | ||
|
5600°K colour temperature | ||
|
Status indicator LED | ||
|
Power on LED | ||
|
Long life, 1000W quartz xenon lamp (10million flashes) | ||
|
50/60Hz with auto detection | ||
|
Extended duty (5 minutes from start-up) 25% continuous no trip | ||
|
Power requirements: | At 120V 2 fixtures/15A circuit At 240V 4 fixtures/16A circuit |
|
|
Shipping weight: | 3 lbs | |
| Ordering Info | ||
| SCM-64Q-DMX | DMX Par 64 Strobe Cannon, 8 1/32" diameter × 5 1/2" deep, 1 1/2lbs | |
| SCM-56Q-DMX | DMX Par 56 Strobe Cannon, 7" diameter × 4 5/16" deep, 1 1/2lbs | |
 |
 |
 |
 |
| Dome Cannon Strobe |
|
Unmatched in brilliance, duty cycle and control flexibility. The Dome Strobe Cannon is a high performance direct DMX-512 control xenon strobelight that combines the concentration of beam flashing with the brilliance of lamp line of sight. Perfect for club or concert applications. | ||
|
Includes adjustable yoke, Lexan Dome (Colours available Red, Blue, Amber), 3-wire heavy-duty line cord and cool-line extruded aluminum body | ||
|
Quick-lock easy removable dome latches | ||
|
Comes assembled and is individually addressable to be used easily in systems of any configuration, including stand alone | ||
|
DMX control-up to 256 strobes with individual rate and intensity | ||
|
9 Hyper effects including Hyperblast, CrossFade, Fade Out, Arcweld, Emergency Vehicle, Rapidfire, Fixed Lightning, Variable Lightning, Solid light | ||
|
High output 30 Joules/flash, 600,000 candela, 4500W peak flash | ||
|
Color Temperature 5600°K | ||
|
Analog inputs/outputs | ||
|
Direct decimal channel assignment selector | ||
|
Daisy-chain analog control compatible | ||
|
Auto recognition of control scheme | ||
|
Self-resetting safety thermal switch (55°C) | ||
|
Not phase sensitive | ||
|
Status indicator & valid DMX signal LED's | ||
|
Can be used with Diversitronics RC-A and Strobe Runner or industry standard DMX and 0-10 analog controllers | ||
|
Long life, quartz xenon lamp (10 million flashes) | ||
|
50/60Hz with auto frequency detection | ||
|
Extended duty (5 minutes start-up), 25% no trip at maximum speed and intensity | ||
|
11" diameter; 15" high (total hanging) | ||
|
Power requirements: | At 120V 2 fixtures/15A circuit At 240V 4 fixtures/16A circuit |
|
|
Shipping weight: | 10 lbs | |
|
|
|
|
| Ellipsoidal Strobe Module ESM-DMX |
|
Now project with high speed xenon strobe bursts in a standard 6"ellipsoidal. The model ESM-DMX is a lightweight DMX strobe module that plugs easily into an Altman 6" axial ellipsoidal by simply switching end caps and attaching a lightweight (2.2 lbs) external power supply via a 3' plugable umbilical cable. Flash control signals come from a simple, low voltage Diversitronics RC-A controller or directly from a DMX control board. | ||
|
Featuring single flash, burst, variable intensity and variable rate | ||
|
DMX and analogue control | ||
|
Small, light weight package (2.2lbs) | ||
|
Lamp life: | 2 million flashes (average) 1,000,000 at max continuous duty cycle 10 million at 25% duty cycle |
|
|
Fast recycle with 15 flashes/second | ||
|
Easy to install | ||
|
Replaceable quartz xenon lamp | ||
|
Operates from standard 120V 50/60Hz line voltage, specify - 240 if 240V 50/60Hz operation required | ||
|
Output 22 joules / flash | ||
|
Colour temperature 5600°K | ||
|
Microprocessor DMX-512 control on individual rates and intensities (2 channels) | ||
|
Digital assignment selector - systems of up to 256 strobes | ||
|
Power supply has 5-pin XLR connectors for DMX inputs/outputs as well as modular analog inputs/outputs | ||
|
Auto recognition of control scheme | ||
|
Daisy-chain analog control compatible | ||
|
Self-resetting safety thermal switch (55°C) | ||
|
Not phase sensitive | ||
|
Status indicator LED | ||
|
Valid DMX signal indicator LED | ||
|
Power on LED | ||
|
Can be used with Diversitronics RC-A and Strobe Runner or any standard DMX controllers | ||
|
Power requirements: | At 120V 2 fixtures/15A circuit At 240V 4 fixtures/16A circuit |
|
|
Dimensions: | 7" × 5" × 4" with bracket 2.2 lbs hanging weight |
|
|
Shipping Weight: | 9lbs | |
|
|
|
|
| Finger Strobes |
|
Creating spectacular displays with stunning & dramatic effects, powerful stop action emphasis, high energy excitement with brilliant flashes from pure white light that simulates explosions, lightning, emergency vehicles with unmatched brilliance and extreme high speed. |
||
|
12-24V DC operation, 1⁄2A | ||
|
Outdoor wet location rated | ||
|
Nema 4 (IP 65) enclosure | ||
|
Brilliant 4 Joule output | ||
|
High quality long life xenon flash lamp | ||
|
10' waterproof strobe head umbilical | ||
|
Custom cable lengths available | ||
|
Optional colours available | ||
|
Stand alone random flash standard (1 fl / sec) model 0491 | ||
|
External trigger options available: +10V, contact closure | ||
|
Optional DMX version | ||
|
Power requirements: | At 120V 2 fixtures/15A circuit At 240V 4 fixtures/16A circuit |
|
|
0491 mechanical: | Nema enclosure 4 1⁄4" × 1 1⁄2” × 2 1⁄2" Flash head 5 1⁄2" × 3⁄4"-5/8" tapered; weight 12 oz. |
|
|
Single head samples available for inspection | ||
|
|
|
|
| Mark Series |
|
Model 50S-2 | |
Mark 3600 | |
Mark 5000 |
| Model 50S-2 |
 |
The world class strobelight that became the classic industry standard for long term quality and reliability. The original design breakthrough linear lamp strobe that was designed for wide area coverage and variable intensity and rate. The same electronics and lamp that lighting professionals have come to rely on, but with a new user friendly mechanical housing. | ||
|
12-24V DC operation, 1⁄2A | ||
|
All solid state circuitry | ||
|
Variable intensity & rate | ||
|
Illuminates an area 60' × 90' with up to 50 foot candles | ||
|
50 Joules at 1-12 fl/sec | ||
|
5600°K | ||
|
Long life, quartz xenon lamp (50 million flashes) | ||
|
Operates from standard 120V line Voltage (100-130V, 60Hz, 15A) | ||
|
Heavy duty extruded aluminum construction for heat dissipation | ||
|
Remote control RC-50, Replacement lamp # 0439 | ||
|
Lightweight design: | 16" × 7" × 7", 8lbs | |
|
Heavy duty 4 pin XLR connector daisy chain feed thru | ||
|
UL listed | ||
|
|
|
|
| Mark 3600 |
 |
|
200-240V, 20A, 50/60Hz |
|
3600W average strobe mode | |
|
30k peak hyper mode | |
|
9 hyper modes with single input trigger | |
|
Continuous mode with auto step down | |
|
1-60 flashes/second on 1 channel | |
|
Fixed intensity blaster with no step down | |
|
1-20 flashes/second on 2 channel mode with variable rate & intensity | |
|
1-12 flashes/second stand alone on unit rotary pot adjustment | |
|
Lamp life, 5 million flashes | |
|
Replacement lamp no. 0411 | |
|
RC-SK-XLR Striker Remote, no. 0422 | |
|
SR-DMX Strobe Runner, no. 484 | |
|
Standard DMX control | |
|
502mm × 216mm × 203mm 19.75" × 8.5" × 8" |
|
|
5.45kg / 12lbs | |
|
United States Patent No. 6,271,634 |
|
|
|
|
| Mark 5000 |
 |
|
200-240V, 20A, 50/60Hz 200-240V, 30A, 50/60Hz |
|
5000W average strobe mode | |
|
40k peak hyper mode | |
|
9 hyper modes with single input trigger | |
|
Continuous mode with auto step down | |
|
1-60 flashes/second on 1 channel | |
|
Fixed intensity blaster with no step down | |
|
1-20 flashes/second on 2 channel mode with variable rate & intensity | |
|
1-12 flashes/second stand alone on unit rotary pot adjustment | |
|
Lamp life, 3 million flashes | |
|
Replacement lamp no. 0415 | |
|
RC-SK-XLR Striker Remote, no. 0422 | |
|
SR-DMX Strobe Runner, no. 484 | |
|
Standard DMX control | |
|
572mm × 216mm × 203mm 22.5" × 8.5" × 8" |
|
|
6.8kg / 15lbs | |
|
United States Patent No. 6,271,634 |
|
|
|
|
| Strobe Runner |
|
Controls | |
|
2-126 Strobes through DMX lines | |
|
Intensity slide control | |
|
Speed slide control | |
|
Audio Gain slide control | |
|
||
| Selectable | ||
|
Number of Strobes (2-126) | |
|
Programs (7) Select from Chase, Auto Reverse, All On, Alternate, Merge, Whirl & Explode | |
|
Effects (11) Including Hyperflash, Rapidfire, Emergency Vehicle, Crossfade, ArcWeld, Fadeout, Variable Lightning, Fixed Lightning, Solid light, Burst and Flash | |
|
Programs can be bumped (one sequence) or locked (repeat sequence) from front panel push buttons or an external switch through jack at rear of unit | |
|
||
| Features | ||
|
Microprocessor based | |
|
Control modes and effects from external DMX input | |
|
Non Volatile memory remembers last state of machine on power down | |
|
All connections on rear of console | |
|
Wall mount transformer powers unit available in 120V or 240V | |
|
Audio chase to music input | |
|
Dimensions 3" × 8" × 7" | |
|
Weight 3lbs | |
|
||
| Models | ||
|
Strobe Runner has original 7 Effects | |
|
Strobe Runner II has additional Effects totaling 11 | |
|
|
|
|
| Superstar Strobes |
|
DS-5 Strobe | |
SS-15 Strobe |
| DS-5 Strobe |
|
DS-5 | ||
| Designed to be used in multiples - the system provides glittering, dramatic random flashing without the use of a controller. | |||
|
Puts out a brilliant flash each second | ||
|
5W seconds/flash (5 Joules) | ||
|
6' line cord | ||
|
Tubluar design provides an omnidirectional 360 degree field allowing the strobe to be visible from any location | ||
|
UL listed | ||
|
Life rating: | 30 million flashes | |
|
Draws only 0.25A @ 120V | ||
|
Size: | 6 1/2" long; 1 7/8" diameter | |
|
Optional 240V operating voltage model DS-5-240 | ||
|
|||
| DS-5ET | |||
| Extremely applicable to controlled entertainment and amusement / themed applications where precise coordinated control is required. | |||
|
Triggers from external source 6-28VDC | ||
|
12" trigger lead | ||
|
Maximum rate is 2 flashes / second | ||
|
Instead of a random flash like the DS-5, the DS-5ET flashes precisely from your controlled signal | ||
|
UL listed | ||
|
Life rating: | 30 million flashes | |
|
Size: | 6 1/2" long; 1 7/8" diameter | |
|
Draws only 0.25A @ 120V | ||
|
Optional 48V operating voltage model | ||
|
|
|
|
| SS-15 Strobe |
|
SS-15 | ||
| The most powerful Superstar Strobe available. Unmatched brilliance will dazzle everyone who sees it! | |||
|
Thermally protected and fashioned in polycarbonate for strength, heat resistance and easy lamp replacement | ||
|
Ideal for theater, TV amusement, nightclub, concert, signage or display use | ||
|
6' line cord and 3-prong grounded plug | ||
|
Solid-state circuitry | ||
|
UL listed | ||
|
Flash rate 40-80 flashes per minute | ||
|
Life rating: | 10 million flashes | |
|
Duty cycle 25% 3 minutes maximum on from cold start | ||
|
Power requirements: | 6 strobes per 15A circuit | |
|
Size: | 6 1/2" long; 1 7/8" diamter; weight 6 oz | |
|
|||
| SS-15ET | |||
|
As above with external triggers from 6-28VDC | ||
|
|
|
|
| Strobe Remotes and Accessories |
|
Strobe Remotes | |
Accessories & Cables |
| Strobe Remotes |
 Strobe Striker |
RC-50 | Remote control for 50S-2 |
| RC-SC | Remote control for CM-64/56 | |
| Striker Remote | Analogue remote for DMX strobes | |
|
||
 RC-50 and RC-SC |
||
|
|
|
|
| Lamp Accessories and Strobe Interconnect Cables |
| CF-25 | 25' model 50s-2 extension cable, additional length 25 foot increments |
| MOD-25 | 25' modular interconnect cable for analogue inputs, additional length 25' increments |
| 0435 | Hanging bracket (C clamp) for models 50, 1500, 3000 |
| 0436 | Analogue local control for stand alone operation |
| RC-SC | Remote control for CM-64/56 |
| 0437 | JB-2 Junction cable for 2 model 50s-2 strobes |
|
|
| Replacement Lamps | |
| 0406 | Quartz linear lamp for model Mark 3000 |
| 0411 | Quartz linear lamp for model Mark 3600 |
| 0415 | Quartz linear for model 5000-DMX, Mark 5000 |
| 0431 | Quartz linear lamp for model Mark II |
| 0433 | Quartz linear lamp for model Mark 2000 |
| 0439 | Quartz linear lamp for models 50S-2,1500-DMX, 3000-DMX |
| 6085 | Lamp for DS-5, DS-5ET |
| 6091 | Quartz helical lamp for strobe cannons and dome strobe |
| 6095 | ESM replacement lamp |
| 6097 | Lamp for SS-15 |
|
|
|
|
|
|
|
E&OE. Information is subject to change without notice. The rights and ownership of all trademarks are recognised. |
||
Copyright © 1997-2008 A.C. Entertainment Technologies Ltd. |
||
|
|
|
