Ellipsoidal Strobe Module ESM-DMX

Now project with high speed xenon strobe bursts in a standard 6"ellipsoidal. The model ESM-DMX is a lightweight DMX strobe module that plugs easily into an Altman 6" axial ellipsoidal by simply switching end caps and attaching a lightweight (2.2 lbs) external power supply via a 3' plugable umbilical cable. Flash control signals come from a simple, low voltage Diversitronics RC-A controller or directly from a DMX control board.
Featuring single flash, burst, variable intensity and variable rate
DMX and analogue control
Small, light weight package (2.2lbs)
Lamp life:

2 million flashes (average)
1,000,000 at max continuous duty cycle
10 million at 25% duty cycle

Fast recycle with 15 flashes/second
Easy to install
Replaceable quartz xenon lamp
Operates from standard 120V 50/60Hz line voltage, specify - 240 if 240V 50/60Hz operation required
Output 22 joules / flash
Colour temperature 5600°K
Microprocessor DMX-512 control on individual rates and intensities (2 channels)
Digital assignment selector - systems of up to 256 strobes
Power supply has 5-pin XLR connectors for DMX inputs/outputs as well as modular analog inputs/outputs
Auto recognition of control scheme
Daisy-chain analog control compatible
Self-resetting safety thermal switch (55°C)
Not phase sensitive
Status indicator LED
Valid DMX signal indicator LED
Power on LED
Can be used with Diversitronics RC-A and Strobe Runner or any standard DMX controllers
Power requirements: At 120V 2 fixtures/15A circuit
At 240V 4 fixtures/16A circuit
Dimensions: 7" × 5" × 4" with bracket
2.2 lbs hanging weight
Shipping Weight: 9lbs